|
147 | vcs | General | Feature Request | Medium | Configuration options revamp | Assigned | |
1.14 |
Task Description
The available configuration options need a serious review and renaming. Old names will be accepted with warnings for either two releases or six months.
Also, should provide a sample configuration file so that the syntax and options are clearer.
|
|
194 | vcs | General | Feature Request | Medium | Files incorrectly reporting "too short" length aren't d... | Researching | |
? |
Task Description
As reported by Dirk Reiners (paraphrased)
Files incorrectly reporting too short length (unlike too long), pass the safe_length_measure check ⇒ This prevents correcting length.
|
|
315 | vcs | General | Feature Request | Low | Recurse directories, output to current dir | Assigned | |
? |
Task Description
Request by Chris Hills
http://outlyer.net/2014-05-18:vcs-1_13_2-released/comment-page-1/#comment-17238:
Thanks Toni. I was hoping I could simply run `$ vcs-1.13.2.bash -? **/*.mp4` to create contact sheets for all videos in all subfolders, but it sounds like I’ll have to use a wrapper script. Would you consider adding this in a future release for a donation?
My reply:
I guess you’re using zsh-ish globbing there.
That’s not something I use so I didn’t even think of the case where recursing could be so simple.
It was a bit of an overlook on my part not to have the option to output to the same directory as the video, probably because recursion always required a wrapper in my head.
|
|
367 | vcs | General | Feature Request | Low | Add HDR support | Assigned | |
1.14 |
Task Description
HDR isn’t well supported as reported by remlap and ThaDr.
Their comments:
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-30901
Hi I am trying to thumbnail some HDR content is there anyway to insert ffmpeg filters in
-vf zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=mobius:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p
Thanks
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32413:
I’m also trying to do some HDR content and pass the -vf info to ffmpeg. I can’t get it to work even using a wrapper script.
It always comes up with awk errors, starting with “unterminated regexp”.
Is there any chance of updating vcs to support manual passing of those -vf arguments to ffmpeg?
HDR content is very common nowadays…
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32423
I’m using vcs 1.13.2 on ubuntu and ended up doing it by adding the line:
-vf ‘zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p’ \
at line 2203, in the ffmpeg_capture() function where it sets the ffmpeg command line options.
Couldn’t work out how to do it with a wrapper script.
|
|
377 | vcs | General | Feature Request | Low | Allow screenshotting half of the video (for side-by-sid... | Assigned | |
? |
Task Description
Asked by Bob on the blog
Would it be possible to somehow specify to only screenshot half of the video image (for 180 side-by-side VR videos)?
Or would this require new features to be added to the VCS?
|
|
178 | vcs | General | Submitted Patch | Low | ffmpeg + piped mplayer dump can be used to identify | Requires testing | |
1.14 |
Task Description
Originally suggested by Dean: http://outlyer.net/2010-08-24:vcs-1_12-2-released/
” [...]
Second, my dvd-drive is useless atm, but i remember previously piping dvd-ouput from mplayer into ffmpeg via a fifo and finding the info generated to be much better than mplayer-alone – for one thing, it won’t ‘downmix’ 6-channel audio automatically. Don’t know if that would be useful to you. The syntax was something like:-
mkfifo piped.vob && mplayer dvd:// -dumpstream -dumpfile piped.vob & \ ffmpeg -i piped.vob
…See what you think… ”
|
|
190 | mp3plot | Core/General | TO-DO | Low | Drop "spinner" | Completed | |
0.6.1 |
Task Description
The spinner, used to show progress adds a lot of overkill just to give some feedback while working
|
|
191 | mp3plot | Core/General | TO-DO | Low | Release 0.6.1 | New | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing mp3plot 0.6.1
Next: FS#192
|
|
192 | mp3plot | Core/General | TO-DO | Low | Release 0.7.0 | New | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing mp3plot 0.7
Previous: FS#191
Next: FS#193
|
|
193 | mp3plot | Core/General | TO-DO | Low | Release 1.0 | New | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing mp3plot 1.0
Previous: FS#192
|
|
244 | Network Type Indicator | | TO-DO | Low | Allow disabling the display of connection status on ico... | Assigned | |
1.6 |
Task Description
To mimic the original way of working
|
|
245 | Network Type Indicator | | TO-DO | Low | Allow choosing between "offline" and "online" icons whe... | Assigned | |
1.6 |
Task Description
Once the user has chosen to use only a set of icons, allow them to choose which of the two.
|
|
246 | Network Type Indicator | | TO-DO | Low | Add support for expanded notifications with extra infor... | Assigned | |
1.6 |
Task Description
No need for description
|
|
329 | Network Type Indicator | General | TO-DO | Low | Release 1.6 | Assigned | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing nettype 1.6
Previous: FS#361 (1.5.2), FS#353 (1.5.1), FS#215 (1.5), FS#252 (1.4), FS#203 (1.3)
|
|
334 | Network Type Indicator | Build System | TO-DO | Very Low | Use Gradle to define build-type-dependant fields | Assigned | |
1.6 |
Task Description
Gradle allows to define fields on the generated class BuildConfig . This should be enough to discard the current per-build-type classes.
Example: https://stackoverflow.com/questions/24518940/custom-fields-for-a-build-type-in-gradle
|
|
350 | Network Type Indicator | Internal | TO-DO | Very Low | Remove Devel.DEBUG | Assigned | |
1.6 |
Task Description
In the past BuildConfig.DEBUG wasn’t reliable (when combining Eclipse and ADT), but on Android Studio with Gradle it can be used safely and hence there’s no need to duplicate the functionality.
|
|
355 | Network Type Indicator | General | TO-DO | Low | Re-do problematic vectorial icons | Researching | |
1.6 |
Task Description
This is a continuation of FS#354 .
Temporarily using pre-rendered PNGs in 1.5.1, should try to re-design icons to render properly on Android 5.0 and up.
|
|
356 | Network Type Indicator | General | TO-DO | Medium | Enhance RTL layout | Assigned | |
1.6 |
Task Description
Rendering on RTL devices is does not work properly due to alignment problems.
Attached: Screen grabs from the pre-release report on an Arabic device.
|
|
358 | Network Type Indicator | General | TO-DO | Low | Revamp notification | Assigned | |
1.6 |
Task Description
Take advantage of Nougat style notifications to display more information to the user.
See https://material.io/guidelines/patterns/notifications.html
Possible design elements:
“App icon”: Network type? AFAICT setting it to the actual app will replace the status bar icon.
Header text: Provider
Timestamp: Time of the last update
Large icon: Network type, bigger?
|
|
359 | Network Type Indicator | General | TO-DO | Medium | Drop dark icons in Lollipop+ | Assigned | |
1.6 |
Task Description
Material design icons are supposed to be white according to comments found online and most apps.
(I can’t find an actual upstream reference) Found at http://www.androiddocs.com/design/style/iconography.html
Dark icons are displayed white in practice.
|
|
360 | Network Type Indicator | General | TO-DO | Low | Remove black icons | Assigned | |
1.6 |
Task Description
Since the introduction of Material, icons should be white. The black icons only display as such in a subset on devices.
|
|
372 | Network Type Indicator | General | TO-DO | Very Low | Drop support for older versions of Android | Assigned | |
1.6 |
Task Description
As of 2019-07 usage below KitKat is anecdotal:
2.3.x: 0.04% 4.0.x: 0.07% 4.1: 0.86% 4.2: 1.35% 4.3: 0.82%
2.3 to 4.3: 3.14%
4.4: 6.28% 5.0: 4.33%
|
|
380 | Network Type Indicator | General | TO-DO | High | Re-stablish in Google Play | Assigned | |
Meta: Release Cycle |
Task Description
Currently off Google Play due to failing to meet a deadline on policy changes.
Currently unable to re-stablish due to being away from my keys
|
|
216 | Quick File Share | | TO-DO | Low | Release 1.0 | Assigned | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing QFS 0.12
|
|
269 | Quick File Share | | TO-DO | Low | Allow sharing multiple files | Requires testing | |
0.15 |
Task Description
Possibly using a dynamic ZIP file
See http://developer.android.com/reference/java/util/zip/ZipOutputStream.html
|
|
271 | Quick File Share | | TO-DO | Medium | Add localisation support | Assigned | |
1.0 | |
|
272 | Quick File Share | | TO-DO | Low | Release 0.15 | Assigned | |
Meta: Release Cycle | |
|
273 | Quick File Share | | TO-DO | Low | Allow sharing files of unknown size | Requires testing | |
0.15 | |
|
274 | Quick File Share | | TO-DO | Low | Implement chunked transfer encoding in web server | Requires testing | |
0.15 | |
|
275 | Quick File Share | | TO-DO | Low | Update progress bar to support files of unknown size | Assigned | |
1.0 | |
|
374 | relevation | General | TO-DO | Low | Release 1.4 | Assigned | |
Meta: Release Cycle | |
|
376 | relevation | General | TO-DO | Very Low | Add command-line argument to generate configuration | Assigned | |
1.4 | |
|
379 | relevation | General | TO-DO | Low | Switch default mode to AND | Assigned | |
1.4 | |
|
151 | vcs | General | TO-DO | Low | Override-able variables cleanup: Removal of deprecated ... | Assigned | |
1.14 | |
|
153 | vcs | General | TO-DO | Very Low | Release 1.14 | Limbo | |
Meta: Release Cycle | |
|
162 | vcs | General | TO-DO | Very Low | Implement plugins | Assigned | |
2.0 | |
|
163 | vcs | General | TO-DO | Very Low | Move rarely used features to plugins | Assigned | |
? | |
|
172 | vcs | General | TO-DO | Very Low | Don't autoload './vcs.conf' | Assigned | |
1.14 | |
|
196 | vcs | General | TO-DO | Medium | ffmpeg is deprecated | Assigned | |
1.14 | |
|
197 | vcs | General | TO-DO | High | Move away from /dev/shm | Assigned | |
1.14 | |
|
200 | vcs | General | TO-DO | Very Low | Release 2.0 | Assigned | |
Meta: Release Cycle | |
|
227 | vcs | General | TO-DO | Low | Failed blank frame evasion should go back to original t... | Assigned | |
1.14 | |
|
249 | vcs | General | TO-DO | Low | Add libav as possible capturer | Assigned | |
1.14 | |
|
375 | vcs | General | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 | |