|
313 | Network Type Indicator | | Bug Report | Low | Incompatibility with Samsung Tab A (LTE version) | Unconfirmed | |
? |
Task Description
Reported by Eddie Wallace
|
|
137 | vcs | General | Bug Report | Medium | Hang with RM files | Unconfirmed | |
|
Task Description
Original report by Dougn Redhammer
vcs hangs with some RM files.
Tracing shows it gets stuck in mplayer_identify .
MPlayer can play the files fine from the terminal. Although it exits with «MPlayer interrupted by signal 11 in module: uninit_vcodec ».
I can reproduce the abrupt termination, it happens when using Real’s native decoder (w64codecs , /usr/lib/codecs/drvc.so ). Using FFMpeg’s decoder (MPlayer’s -vc ffrv30 ) MPlayer exits normally.
I can’t reproduce the hang either way.
|
|
109 | vcs | General | Bug Report | Medium | Failure to capture with packed B-frames in AVI | Unconfirmed | |
|
Task Description
Originally reported by Dougn Redhammer
|
|
95 | vcs | General | Bug Report | Low | Running vcs from find fails on WMVs. They work directly... | Unconfirmed | |
|
Task Description
Originally reported by Tomasz Strózik
Example given:
$ find $DIR \(-name "*.avi" -o -name "*.wmv" -o -name "*.mpg" -o -name "*.mp4" \) -exec vcs -dt -ds -n 12 -c2 -H 200 --jpeg --quiet {} \;
Works on avi, mpg and mp4 but fails on wmv with Failed to capture frame (at second xxx.000)
Processing the same file directly works:
$ vcs -dt -ds -n 12 -c2 -H 200 --jpeg --quiet File.wmv
|
|
54 | vcs | General | Bug Report | Low | minutes printed as hours with mplayer | Unconfirmed | |
|
Task Description
Originally reported by Phil Grundig
Version of mplayer : mplayer (1.0pre8cvs)
|
|
53 | vcs | General | Bug Report | Low | ffmpeg doesn't accept file names with spaces | Unconfirmed | |
|
Task Description
Originally reported by Phil Grundig
Version of ffmpeg : ffmpeg (CVS-060515)
|
|
193 | mp3plot | Core/General | TO-DO | Low | Release 1.0 | New | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing mp3plot 1.0
Previous: FS#192
|
|
192 | mp3plot | Core/General | TO-DO | Low | Release 0.7.0 | New | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing mp3plot 0.7
Previous: FS#191
Next: FS#193
|
|
191 | mp3plot | Core/General | TO-DO | Low | Release 0.6.1 | New | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing mp3plot 0.6.1
Next: FS#192
|
|
117 | mp3plot | Core/General | Feature Request | Low | Handle free-form bitrate | New | |
1.0 |
Task Description
No need for description
|
|
116 | mp3plot | Image output | Bug Report | Low | Optionally display generated image | New | |
0.7.0 |
Task Description
No need for description
|
|
115 | mp3plot | Image output | Feature Request | Low | Allow user-specified output image size | New | |
0.7.0 |
Task Description
No need for description
|
|
383 | relevation | General | Feature Request | Low | Add command-line argument to ignore configuration file | Assigned | |
1.4 |
Task Description
Useful for debugging, likely not useful for users since the command-line already overrides configurable arguments
|
|
382 | vcs | General | Bug Report | Medium | Look into detecting or setting manually GNU getopt | Assigned | |
? |
Task Description
Reported by KW in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-51875
With the new script I'm getting issues the following error:
No compatible version of getopt in path, can't continue.
Enhanced getopt (i.e. GNU getopt) is required
Added by Darko in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-52719
The homebrew's version of vcs has this at line 186:
declare GETOPT=/opt/homebrew/opt/gnu-getopt/bin/getopt
While Toni's just uses whatever is on path:
declare GETOPT=getopt
… which on macOS is non-gnu version of getopt.
Added by X in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-53401
The issue is on line 186. Brew version has this:
declare GETOPT=/usr/local/opt/gnu-getopt/bin/getopt
The trunk version has:
declare GETOPT=getopt
When I backport the most important change you did in the trunk version ('`fx:image.mean` > `fx:mean` ') then indeed the error messages on '.mean*100 ' are gone.
|
|
380 | Network Type Indicator | General | TO-DO | High | Re-stablish in Google Play | Assigned | |
Meta: Release Cycle |
Task Description
Currently off Google Play due to failing to meet a deadline on policy changes.
Currently unable to re-stablish due to being away from my keys
|
|
379 | relevation | General | TO-DO | Low | Switch default mode to AND | Assigned | |
1.4 |
Task Description
It just makes more sense
|
|
378 | vcs | General | Bug Report | Medium | Blank frame evasion produces error on latest ImageMagic... | Assigned | |
1.14 |
Task Description
Reported by Paul:
Hey, I'm using VCS via Homebrew Install ( https://formulae.brew.sh/formula/vcs#default) and since the last update of imagemagick (?) I get dozens of error messages:
convert: Expected operator at '.mean*100' @ error/fx.c/GetOperator/2408
Confirmed to happen on ImageMagick 7.1 on Linux, the contact sheet is generated but blank frame evasion is skipped
|
|
377 | vcs | General | Feature Request | Low | Allow screenshotting half of the video (for side-by-sid... | Assigned | |
? |
Task Description
Asked by Bob on the blog
Would it be possible to somehow specify to only screenshot half of the video image (for 180 side-by-side VR videos)?
Or would this require new features to be added to the VCS?
|
|
376 | relevation | General | TO-DO | Very Low | Add command-line argument to generate configuration | Assigned | |
1.4 |
Task Description
Should provide an easy way to generate a new configuration file based on the provided command-line arguments.
|
|
375 | vcs | General | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 |
Task Description
Should allow to disable it in both configuration and command-line.
|
|
374 | relevation | General | TO-DO | Low | Release 1.4 | Assigned | |
Meta: Release Cycle |
Task Description
Meta-task depending on tasks scheduled for the 1.4 release.
Previous release: FS#234 (1.3.1)
|
|
372 | Network Type Indicator | General | TO-DO | Very Low | Drop support for older versions of Android | Assigned | |
1.6 |
Task Description
As of 2019-07 usage below KitKat is anecdotal:
2.3.x: 0.04% 4.0.x: 0.07% 4.1: 0.86% 4.2: 1.35% 4.3: 0.82%
2.3 to 4.3: 3.14%
4.4: 6.28% 5.0: 4.33%
|
|
370 | Network Type Indicator | General | Bug Report | Medium | App crashes on boot | Assigned | |
1.6 |
Task Description
The app force-closes on device boot when load on boot is enabled.
Once the boot is complete it behaves normally.
Seen in Oreo.
Presumably related to FS#369.
|
|
369 | Network Type Indicator | General | Bug Report | Medium | Notification doesn't load on boot | Assigned | |
1.6 |
Task Description
Reported by Terry Parrott
Reports that the app won’t auto load despite having the option enabled.
Reported on Oreo.
Presumably related to FS#370.
|
|
367 | vcs | General | Feature Request | Low | Add HDR support | Assigned | |
1.14 |
Task Description
HDR isn’t well supported as reported by remlap and ThaDr.
Their comments:
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-30901
Hi I am trying to thumbnail some HDR content is there anyway to insert ffmpeg filters in
-vf zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=mobius:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p
Thanks
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32413:
I’m also trying to do some HDR content and pass the -vf info to ffmpeg. I can’t get it to work even using a wrapper script.
It always comes up with awk errors, starting with “unterminated regexp”.
Is there any chance of updating vcs to support manual passing of those -vf arguments to ffmpeg?
HDR content is very common nowadays…
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32423
I’m using vcs 1.13.2 on ubuntu and ended up doing it by adding the line:
-vf ‘zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p’ \
at line 2203, in the ffmpeg_capture() function where it sets the ffmpeg command line options.
Couldn’t work out how to do it with a wrapper script.
|
|
363 | vcs | General | Bug Report | Low | File names with '#' lead to errors when creating versio... | Assigned | |
1.14 | |
|
360 | Network Type Indicator | General | TO-DO | Low | Remove black icons | Assigned | |
1.6 | |
|
359 | Network Type Indicator | General | TO-DO | Medium | Drop dark icons in Lollipop+ | Assigned | |
1.6 | |
|
358 | Network Type Indicator | General | TO-DO | Low | Revamp notification | Assigned | |
1.6 | |
|
356 | Network Type Indicator | General | TO-DO | Medium | Enhance RTL layout | Assigned | |
1.6 | |
|
350 | Network Type Indicator | Internal | TO-DO | Very Low | Remove Devel.DEBUG | Assigned | |
1.6 | |
|
335 | Network Type Indicator | General | Feature Request | Low | Add alternative icons | Assigned | |
1.6 | |
|
334 | Network Type Indicator | Build System | TO-DO | Very Low | Use Gradle to define build-type-dependant fields | Assigned | |
1.6 | |
|
331 | Network Type Indicator | General | Feature Request | Very Low | Display provider name in notification | Assigned | |
1.6 | |
|
329 | Network Type Indicator | General | TO-DO | Low | Release 1.6 | Assigned | |
Meta: Release Cycle | |
|
322 | Network Type Indicator | General | Feature Request | Low | Allow disabling icon unless roaming | Assigned | |
? | |
|
321 | Network Type Indicator | General | Feature Request | Low | Allow hiding icon when mobile data is tured off | Assigned | |
? | |
|
315 | vcs | General | Feature Request | Low | Recurse directories, output to current dir | Assigned | |
? | |
|
275 | Quick File Share | | TO-DO | Low | Update progress bar to support files of unknown size | Assigned | |
1.0 | |
|
272 | Quick File Share | | TO-DO | Low | Release 0.15 | Assigned | |
Meta: Release Cycle | |
|
271 | Quick File Share | | TO-DO | Medium | Add localisation support | Assigned | |
1.0 | |
|
255 | Network Type Indicator | | Bug Report | High | Icon doesn't get updated with network changes | Assigned | |
? | |
|
249 | vcs | General | TO-DO | Low | Add libav as possible capturer | Assigned | |
1.14 | |
|
246 | Network Type Indicator | | TO-DO | Low | Add support for expanded notifications with extra infor... | Assigned | |
1.6 | |
|
245 | Network Type Indicator | | TO-DO | Low | Allow choosing between "offline" and "online" icons whe... | Assigned | |
1.6 | |
|
244 | Network Type Indicator | | TO-DO | Low | Allow disabling the display of connection status on ico... | Assigned | |
1.6 | |
|
227 | vcs | General | TO-DO | Low | Failed blank frame evasion should go back to original t... | Assigned | |
1.14 | |
|
223 | Network Type Indicator | | Feature Request | Very Low | Indicate roaming in status bar | Assigned | |
1.6 | |
|
220 | Network Type Indicator | | Feature Request | Very Low | Allow turning on/off network connection | Assigned | |
? | |
|
216 | Quick File Share | | TO-DO | Low | Release 1.0 | Assigned | |
Meta: Release Cycle | |