|
153 | vcs | General | TO-DO | Very Low | Release 1.14 | Limbo | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 1.14
Previous: FS#152 FS#218 FS#224 FS#250 FS#366
|
|
200 | vcs | General | TO-DO | Very Low | Release 2.0 | Assigned | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 2.0 .
v2.0 will be a rewrite in Python.
Previous: FS#153
|
|
194 | vcs | General | Feature Request | Medium | Files incorrectly reporting "too short" length aren't d... | Researching | |
? |
Task Description
As reported by Dirk Reiners (paraphrased)
Files incorrectly reporting too short length (unlike too long), pass the safe_length_measure check ⇒ This prevents correcting length.
|
|
382 | vcs | General | Bug Report | Medium | Look into detecting or setting manually GNU getopt | Assigned | |
? |
Task Description
Reported by KW in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-51875
With the new script I'm getting issues the following error:
No compatible version of getopt in path, can't continue.
Enhanced getopt (i.e. GNU getopt) is required
Added by Darko in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-52719
The homebrew's version of vcs has this at line 186:
declare GETOPT=/opt/homebrew/opt/gnu-getopt/bin/getopt
While Toni's just uses whatever is on path:
declare GETOPT=getopt
… which on macOS is non-gnu version of getopt.
Added by X in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-53401
The issue is on line 186. Brew version has this:
declare GETOPT=/usr/local/opt/gnu-getopt/bin/getopt
The trunk version has:
declare GETOPT=getopt
When I backport the most important change you did in the trunk version ('`fx:image.mean` > `fx:mean` ') then indeed the error messages on '.mean*100 ' are gone.
|
|
315 | vcs | General | Feature Request | Low | Recurse directories, output to current dir | Assigned | |
? |
Task Description
Request by Chris Hills
http://outlyer.net/2014-05-18:vcs-1_13_2-released/comment-page-1/#comment-17238:
Thanks Toni. I was hoping I could simply run `$ vcs-1.13.2.bash -? **/*.mp4` to create contact sheets for all videos in all subfolders, but it sounds like I’ll have to use a wrapper script. Would you consider adding this in a future release for a donation?
My reply:
I guess you’re using zsh-ish globbing there.
That’s not something I use so I didn’t even think of the case where recursing could be so simple.
It was a bit of an overlook on my part not to have the option to output to the same directory as the video, probably because recursion always required a wrapper in my head.
|
|
377 | vcs | General | Feature Request | Low | Allow screenshotting half of the video (for side-by-sid... | Assigned | |
? |
Task Description
Asked by Bob on the blog
Would it be possible to somehow specify to only screenshot half of the video image (for 180 side-by-side VR videos)?
Or would this require new features to be added to the VCS?
|
|
52 | vcs | General | Feature Request | Very Low | Allow review of screenshots before composing | Limbo | |
? |
Task Description
Originally requested by Daniel
|
|
163 | vcs | General | TO-DO | Very Low | Move rarely used features to plugins | Assigned | |
? |
Task Description
No need for description
|
|
164 | vcs | General | Bug Report | Very Low | Implement instrumentation | Assigned | |
? |
Task Description
No need for description
|
|
92 | vcs | General | Feature Request | Very Low | Support OpenSolaris/SunOS | Limbo | |
2.0 |
Task Description
Being based on System V, it’s quite different to most other Unix-like OSes, might be a good target for x-platform enhancements
|
|
162 | vcs | General | TO-DO | Very Low | Implement plugins | Assigned | |
2.0 |
Task Description
No need for description
|
|
197 | vcs | General | TO-DO | High | Move away from /dev/shm | Assigned | |
1.14 |
Task Description
/dev/shm isn’t really intended as an alternate temporary location, and VCS’ temporary files can easily grow too large for it too.
As a possible alternative offer a first-run choice of temp-dir (maybe suggesting /dev/shm ).
References: http://wiki.debian.org/ReleaseGoals/RunDirectory#Why_put_.2BAC8-dev.2BAC8-shm_and_.2BAC8-tmp_under_.2BAC8-run.3F http://stackoverflow.com/questions/9745281/tmp-vs-dev-shm-for-temp-file-storage-on-linux
|
|
385 | vcs | General | Bug Report | High | Handle rotation of video files rotated via metadata | Researching | |
1.14 |
Task Description
Originally reported by Pär: https://outlyer.net/2019-11-26:vcs-1-13-4-released/comment-page-1/#comment-60689
Another thing that is a little bit annoying, but isn't a very big deal, is the fact that videos made from a phone where the image is rotated in metadata, doesn't produce a correct aspect ratio. For example, a video that is stored as 1920×1080 (16:9), but shown as 1080×1920 (9:16), due to metadata rotation, vcs will create thumbnails in 1920×1080 aspect ratio (16:9) but show them rotated correctly, which means the image at 9:16 gets squashed to fit into 16:9. Like I said, not a very huge deal, but it looks somewhat silly and it would be great if it was possible to fix. I've tried to see if I could set the aspect parameter but it doesn't seem to do much when the rotation is made in metadata. Metadata usually state something like: > > "`bash Side data: displaymatrix: rotation of -90.00 degrees "`
|
|
147 | vcs | General | Feature Request | Medium | Configuration options revamp | Assigned | |
1.14 |
Task Description
The available configuration options need a serious review and renaming. Old names will be accepted with warnings for either two releases or six months.
Also, should provide a sample configuration file so that the syntax and options are clearer.
|
|
196 | vcs | General | TO-DO | Medium | ffmpeg is deprecated | Assigned | |
1.14 |
Task Description
See http://libav.org/, Jan 27 2012. Also http://libav.org/index.html#fftools_rename for changes to the syntax.
Must change to avprobe /ffprobe and/or avconv .
|
|
378 | vcs | General | Bug Report | Medium | Blank frame evasion produces error on latest ImageMagic... | Assigned | |
1.14 |
Task Description
Reported by Paul:
Hey, I'm using VCS via Homebrew Install ( https://formulae.brew.sh/formula/vcs#default) and since the last update of imagemagick (?) I get dozens of error messages:
convert: Expected operator at '.mean*100' @ error/fx.c/GetOperator/2408
Confirmed to happen on ImageMagick 7.1 on Linux, the contact sheet is generated but blank frame evasion is skipped
|
|
384 | vcs | General | TO-DO | Medium | Use magick command with ImageMagick 7 | Requires testing | |
1.14 |
Task Description
Originally reported by Pär: https://outlyer.net/2019-11-26:vcs-1-13-4-released/comment-page-1/#comment-60674
Recently got an update of ImageMagick:
$ magick --version
Version: ImageMagick 7.1.1-33 Q16-HDRI x86_64 22263 https://imagemagick.org
Copyright: (C) 1999 ImageMagick Studio LLC
License: https://imagemagick.org/script/license.php
Features: Cipher DPC HDRI Modules OpenCL OpenMP(4.5)
Delegates (built-in): bzlib cairo djvu fftw fontconfig freetype heic jbig jng jp2 jpeg jxl lcms lqr ltdl lzma openexr pangocairo png raqm raw rsvg tiff webp wmf x xml zip zlib zstd
Compiler: gcc (14.1)
Because of that, the "convert" command now gives a deprecation warning:
WARNING: The convert command is deprecated in IMv7, use "magick"
Trying to do that, replacing all the calls to 'convert' for 'magick', the temp images seem to be problematic (I've added a few printouts of the suspected code blocks):
[i] Capturing in range [04:49.49-19:17.95]. Total length: 20:25.35
[i] Generating capture #1/4 (04:49.49)...
magick: no images found for operation `-geometry' at CLI arg 7 @ error/operation.c/CLIOption/5479.
magick: magick -background 'transparent' -fill 'transparent' '/dev/shm/vcs.SGteWR/vcs-ZQ0dJj-cap-000001.png' \( -geometry 267x200! \) -flatten \( -box '#000000aa' -fill 'White' -stroke none -pointsize '9' -gravity 'SouthEast' -font '/usr/share/fonts/TTF/DejaVuSans.ttf' -strokewidth 3 -annotate +5+5 ' 04:49.49 ' \) -flatten -gravity None -flatten \( -background black +clone -shadow 50x2+4+4 -background none \) +swap -flatten -trim +repage -flatten '/dev/shm/vcs.SGteWR/vcs-zQhKDd.png'
If I try to cp those two temp images on the line below the 'magick' command, they become 0 byte files.
The video renderer ffmpeg has also gone through a couple of steps of upgrades over the years, I now have:
$ ffmpeg -version
ffmpeg version n6.1.1 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 13.2.1 (GCC) 20230801
So commands like '-vframes' is now '-frames:v' and so on. No errors, just friendly suggestions in the man page. I replaced those also, but still the same problem.
I should have listened more carefully when our kindergarten teacher went through Bash. ;) IOW, I'm sure it's something simple I am not understanding.
N.b. I can still use vcs with the normal 'convert' command, but depending on how "militia force" serious the ImageMagick gang is going to be about deprecation warnings and removal of old code, it might stop working at some point in the future and I think that would be sad.
Any ideas? Thanks! :)
|
|
56 | vcs | General | Feature Request | Low | Add transcode as possible capturer | Deferred | |
1.14 |
Task Description
Originally requested by Phil Grundig
See vcs:devel:transcode
|
|
151 | vcs | General | TO-DO | Low | Override-able variables cleanup: Removal of deprecated ... | Assigned | |
1.14 |
Task Description
Introduce new names in 1.12 ( FS#120 )
Remove old names in 1.13 or 1.14 (this)
|
|
178 | vcs | General | Submitted Patch | Low | ffmpeg + piped mplayer dump can be used to identify | Requires testing | |
1.14 |
Task Description
Originally suggested by Dean: http://outlyer.net/2010-08-24:vcs-1_12-2-released/
” [...]
Second, my dvd-drive is useless atm, but i remember previously piping dvd-ouput from mplayer into ffmpeg via a fifo and finding the info generated to be much better than mplayer-alone – for one thing, it won’t ‘downmix’ 6-channel audio automatically. Don’t know if that would be useful to you. The syntax was something like:-
mkfifo piped.vob && mplayer dvd:// -dumpstream -dumpfile piped.vob & \ ffmpeg -i piped.vob
…See what you think… ”
|
|
227 | vcs | General | TO-DO | Low | Failed blank frame evasion should go back to original t... | Assigned | |
1.14 |
Task Description
When a frame evasion is tried and given up, the chosen timestamp should be the original instead of the last attempt
|
|
249 | vcs | General | TO-DO | Low | Add libav as possible capturer | Assigned | |
1.14 |
Task Description
No need for description
|
|
363 | vcs | General | Bug Report | Low | File names with '#' lead to errors when creating versio... | Assigned | |
1.14 |
Task Description
I.e. create file sample#.avi
Run vcs on sample#.avi -> sample#.avi.png is created. Run vcs again. sample#.avi-1.png should be created, but sed generates an error.
|
|
367 | vcs | General | Feature Request | Low | Add HDR support | Assigned | |
1.14 |
Task Description
HDR isn’t well supported as reported by remlap and ThaDr.
Their comments:
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-30901
Hi I am trying to thumbnail some HDR content is there anyway to insert ffmpeg filters in
-vf zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=mobius:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p
Thanks
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32413:
I’m also trying to do some HDR content and pass the -vf info to ffmpeg. I can’t get it to work even using a wrapper script.
It always comes up with awk errors, starting with “unterminated regexp”.
Is there any chance of updating vcs to support manual passing of those -vf arguments to ffmpeg?
HDR content is very common nowadays…
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32423
I’m using vcs 1.13.2 on ubuntu and ended up doing it by adding the line:
-vf ‘zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p’ \
at line 2203, in the ffmpeg_capture() function where it sets the ffmpeg command line options.
Couldn’t work out how to do it with a wrapper script.
|
|
93 | vcs | General | Bug Report | Very Low | grep -o is not portable | Assigned | |
1.14 |
Task Description
-o is a GNU extension, supported in Linux and FreeBSD
Unsupported in SunOS, OpenBSD?
|
|
125 | vcs | General | Feature Request | Very Low | Blank screen evasion (mtn feature) | Deferred | |
1.14 | |
|
172 | vcs | General | TO-DO | Very Low | Don't autoload './vcs.conf' | Assigned | |
1.14 | |
|
375 | vcs | General | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 | |
|
380 | Network Type Indicator | General | TO-DO | High | Re-stablish in Google Play | Assigned | |
Meta: Release Cycle | |
|
329 | Network Type Indicator | General | TO-DO | Low | Release 1.6 | Assigned | |
Meta: Release Cycle | |
|
255 | Network Type Indicator | | Bug Report | High | Icon doesn't get updated with network changes | Assigned | |
? | |
|
336 | Network Type Indicator | General | Bug Report | High | App doesn't load on boot (Huawei phones) | Researching | |
? | |
|
337 | Network Type Indicator | General | Bug Report | High | App doesn't load on boot | Researching | |
? | |
|
201 | Network Type Indicator | | Feature Request | Low | Support multi-SIM devices | Assigned | |
? | |
|
313 | Network Type Indicator | | Bug Report | Low | Incompatibility with Samsung Tab A (LTE version) | Unconfirmed | |
? | |
|
321 | Network Type Indicator | General | Feature Request | Low | Allow hiding icon when mobile data is tured off | Assigned | |
? | |
|
322 | Network Type Indicator | General | Feature Request | Low | Allow disabling icon unless roaming | Assigned | |
? | |
|
340 | Network Type Indicator | General | Feature Request | Low | Add 4G+ icon | Researching | |
? | |
|
341 | Network Type Indicator | General | Bug Report | Low | Status bar icon disappears after a while on Huawei phon... | Requires testing | |
? | |
|
342 | Network Type Indicator | General | Feature Request | Low | Record history | Researching | |
? | |
|
220 | Network Type Indicator | | Feature Request | Very Low | Allow turning on/off network connection | Assigned | |
? | |
|
277 | Network Type Indicator | | Feature Request | Very Low | Add a notification sound when the connection is lost | Researching | |
? | |
|
278 | Network Type Indicator | | Feature Request | Very Low | Display network activity | Researching | |
? | |
|
356 | Network Type Indicator | General | TO-DO | Medium | Enhance RTL layout | Assigned | |
1.6 | |
|
359 | Network Type Indicator | General | TO-DO | Medium | Drop dark icons in Lollipop+ | Assigned | |
1.6 | |
|
369 | Network Type Indicator | General | Bug Report | Medium | Notification doesn't load on boot | Assigned | |
1.6 | |
|
370 | Network Type Indicator | General | Bug Report | Medium | App crashes on boot | Assigned | |
1.6 | |
|
244 | Network Type Indicator | | TO-DO | Low | Allow disabling the display of connection status on ico... | Assigned | |
1.6 | |
|
245 | Network Type Indicator | | TO-DO | Low | Allow choosing between "offline" and "online" icons whe... | Assigned | |
1.6 | |
|
246 | Network Type Indicator | | TO-DO | Low | Add support for expanded notifications with extra infor... | Assigned | |
1.6 | |