|
183 | relevation | General | TO-DO | Low | Support PyCryptoPlus | Closed | |
|
Task Description
PyCryptoPlus is a drop-in replacement for PyCrypto written in Python, meaning it can run much more easily on Windows.
|
|
338 | Network Type Indicator | General | Bug Report | Low | App doesn't load on boot (LG phones) | Closed | |
|
Task Description
Reported by Red Rospo 04/08/2016 on Google Play
Da migliorare Non parte al boot
LG G5 (h1) / Marshmallow / r14034
|
|
339 | Network Type Indicator | General | Bug Report | Low | App doesn't load on boot (Samsung phones) | Closed | |
|
Task Description
Reported by Simon Howard 18/12/2016 on Google Play
Issue with auto start on boot I’ve had this app for some time now, but it will not auto start on boot on my current phone (Galaxy S5, Marshmallow 6.01)
Galaxy S5 (klte) / Marshmallow / r14034
|
|
152 | vcs | General | TO-DO | Very Low | Release 1.13 | Closed | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 1.13
Previous: FS#140 , FS#170
Next: FS#153
|
|
153 | vcs | General | TO-DO | Very Low | Release 1.14 | Limbo | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 1.14
Previous: FS#152 FS#218 FS#224 FS#250 FS#366
|
|
170 | vcs | General | TO-DO | Very Low | Release 1.12.3 | Closed | |
Meta: Release Cycle |
Task Description
Bugfixes from the 1.13 branch should be backported to 1.12, since 1.13 will need a lot of testing.
Previous: FS#165
Next: FS#152
|
|
200 | vcs | General | TO-DO | Very Low | Release 2.0 | Assigned | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 2.0.
v2.0 will be a rewrite in Python.
Previous: FS#153
|
|
82 | vcs | General | Feature Request | Very Low | Unify profiles and funky modes | Closed | |
? |
Task Description
No need for description
|
|
163 | vcs | General | TO-DO | Very Low | Move rarely used features to plugins | Assigned | |
? |
Task Description
No need for description
|
|
164 | vcs | General | Bug Report | Very Low | Implement instrumentation | Assigned | |
? |
Task Description
No need for description
|
|
92 | vcs | General | Feature Request | Very Low | Support OpenSolaris/SunOS | Limbo | |
2.0 |
Task Description
Being based on System V, it’s quite different to most other Unix-like OSes, might be a good target for x-platform enhancements
|
|
162 | vcs | General | TO-DO | Very Low | Implement plugins | Assigned | |
2.0 |
Task Description
No need for description
|
|
93 | vcs | General | Bug Report | Very Low | grep -o is not portable | Assigned | |
1.14 |
Task Description
-o is a GNU extension, supported in Linux and FreeBSD
Unsupported in SunOS, OpenBSD?
|
|
125 | vcs | General | Feature Request | Very Low | Blank screen evasion (mtn feature) | Deferred | |
1.14 |
Task Description
Great feature, implemented in mtn
http://moviethumbnail.sourceforge.net/
See also FS#126
|
|
172 | vcs | General | TO-DO | Very Low | Don't autoload './vcs.conf' | Assigned | |
1.14 |
Task Description
See FS#171
|
|
375 | vcs | General | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 |
Task Description
Should allow to disable it in both configuration and command-line.
|
|
226 | vcs | General | Bug Report | Very Low | Pre-releases error on files with single quotes in their ... | Closed | |
1.13.2 |
Task Description
Pointed out by Miya
eval: line 1874: syntax error in conditional expression
eval: line 1874: syntax error near `got'
eval: line 1874: `[[ -n 'File's got problems.mp4.png' ]]'
Internal error at safe_rename():1510: [[ -n 'File's got problems.mp4.png' ]]
|
|
215 | Network Type Indicator | General | TO-DO | Very Low | Release 1.5 | Closed | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing nettype 1.5
Previous: FS#203 (1.3), FS#252 (1.4)
Next: FS#329 (1.6)
|
|
171 | vcs | General | TO-DO | Very Low | Deprecate './vcs.conf' in favour of profiles | Closed | |
1.13 |
Task Description
The function that vcs.conf in current dir accomplished is covered by profiles. If wanted it can still be manually loaded with -C :pwd or -C vcs.conf
|
|
176 | vcs | General | TO-DO | Very Low | Filmstrip not realistic | Closed | |
1.13 |
Task Description
The filmstrip mode has had a placeholder implementation since the start, it should look closer to an actual film strip.
E.g.: http://sites.google.com/site/elsamuko/gimp/sprocket
|
|
179 | vcs | General | TO-DO | Very Low | Add codec identification for FRAPS captures | Closed | |
1.13 |
Task Description
mplayer: FPS1
i.e.:
ID_VIDEO_CODEC=fffraps
ID_VIDEO_FORMAT=FPS1
ffmpeg: fraps
i.e.:
Stream #0.0: Video: fraps, yuvj420p, 1680x1050, 30 fps, 30 tbr, 30 tbn, 30 tbc
|
|
166 | vcs | General | TO-DO | Very Low | Support WebM | Closed | |
1.12.2 |
Task Description
WebM: http://www.webmproject.org/
Uses VP8 video and Vorbis audio.
Current Status:
Identification
MPlayer: Video detected as VP80
FFmpeg:
* 0.5.1+svn20100311: Not supported (fails in the safe-length-detection stage)
* 0.6~svn20100603: Video detected as libvpx
Capture
Both appear to work fine.
|
|
220 | Network Type Indicator | | Feature Request | Very Low | Allow turning on/off network connection | Assigned | |
? |
Task Description
Submitted by Tom
Allow turning network connection on/off directly
|
|
221 | Network Type Indicator | | Feature Request | Very Low | Display signal strength in status bar | Closed | |
? |
Task Description
Submitted by Tom
See also FS#251
Display signal strength in dbm/asu in the status bar
|
|
277 | Network Type Indicator | | Feature Request | Very Low | Add a notification sound when the connection is lost | Researching | |
? |
Task Description
Feedback from Wai keun Chong
Wai keun Chong 21/10/2014 4:28
Good App
This is the app what i looking for and it would be great if could add
a notification sound when a network loss
|
|
278 | Network Type Indicator | | Feature Request | Very Low | Display network activity | Researching | |
? | |
|
222 | Network Type Indicator | | Feature Request | Very Low | Display provider name in status bar | Closed | |
1.6 | |
|
223 | Network Type Indicator | | Feature Request | Very Low | Indicate roaming in status bar | Assigned | |
1.6 | |
|
331 | Network Type Indicator | General | Feature Request | Very Low | Display provider name in notification | Assigned | |
1.6 | |
|
334 | Network Type Indicator | Build System | TO-DO | Very Low | Use Gradle to define build-type-dependant fields | Assigned | |
1.6 | |
|
350 | Network Type Indicator | Internal | TO-DO | Very Low | Remove Devel.DEBUG | Assigned | |
1.6 | |
|
372 | Network Type Indicator | General | TO-DO | Very Low | Drop support for older versions of Android | Assigned | |
1.6 | |
|
81 | vcs | General | Feature Request | Very Low | Add profiles support | Closed | |
1.12 | |
|
140 | vcs | General | TO-DO | Very Low | Release 1.12 | Closed | |
1.12 | |
|
146 | vcs | General | TO-DO | Very Low | Remove "--mincho" | Closed | |
1.12 | |
|
148 | vcs | General | Feature Request | Very Low | Include generation of config/profile from the command-l ... | Closed | |
1.12 | |
|
131 | vcs | General | Bug Report | Very Low | ImageMagick version check uses GNU regex | Closed | |
1.11.1 | |
|
23 | vcs | General | Feature Request | Very Low | Make FFmpeg optional | Closed | |
1.11 | |
|
51 | vcs | General | Feature Request | Very Low | Allow manually setting padding | Closed | |
1.11 | |
|
105 | vcs | General | Feature Request | Very Low | Allow overriding default height | Closed | |
1.11 | |
|
347 | Network Type Indicator | General | Feature Request | Very Low | Make notification priority configurable | Closed | |
1.5 (rel. xx039) | |
|
281 | Network Type Indicator | | TO-DO | Very Low | Change from CheckBoxPreferences to SwitchPreferences in ... | Closed | |
1.4.4 (rel. 07032, 14032) | |
|
186 | relevation | General | TO-DO | Very Low | Release 1.2 | Closed | |
Meta: Release Cycle | |
|
202 | Network Type Indicator | | Feature Request | Very Low | Allow opening network settings from notification | Closed | |
1.3 (rel. 19) | |
|
376 | relevation | General | TO-DO | Very Low | Add command-line argument to generate configuration | Assigned | |
1.4 | |
|
235 | relevation | General | TO-DO | Very Low | Refactor into a cleaner package | Closed | |
1.3.1 | |
|
14 | vcs | General | Feature Request | Very Low | Support per-dir and system-wide config files | Closed | |
| |
|
15 | vcs | General | Feature Request | Very Low | Print all failed requirements | Closed | |
| |
|
18 | vcs | General | Bug Report | Very Low | Numcaps=0 should be rejected | Closed | |
| |
|
19 | vcs | General | Feature Request | Very Low | Allow highlighting individual captures | Closed | |
| |
