|
153 | vcs | General | TO-DO | Very Low | Release 1.14 | Limbo | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 1.14
Previous: FS#152 FS#218 FS#224 FS#250 FS#366
|
|
200 | vcs | General | TO-DO | Very Low | Release 2.0 | Assigned | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 2.0 .
v2.0 will be a rewrite in Python.
Previous: FS#153
|
|
52 | vcs | General | Feature Request | Very Low | Allow review of screenshots before composing | Limbo | |
? |
Task Description
Originally requested by Daniel
|
|
163 | vcs | General | TO-DO | Very Low | Move rarely used features to plugins | Assigned | |
? |
Task Description
No need for description
|
|
164 | vcs | General | Bug Report | Very Low | Implement instrumentation | Assigned | |
? |
Task Description
No need for description
|
|
92 | vcs | General | Feature Request | Very Low | Support OpenSolaris/SunOS | Limbo | |
2.0 |
Task Description
Being based on System V, it’s quite different to most other Unix-like OSes, might be a good target for x-platform enhancements
|
|
162 | vcs | General | TO-DO | Very Low | Implement plugins | Assigned | |
2.0 |
Task Description
No need for description
|
|
93 | vcs | General | Bug Report | Very Low | grep -o is not portable | Assigned | |
1.14 |
Task Description
-o is a GNU extension, supported in Linux and FreeBSD
Unsupported in SunOS, OpenBSD?
|
|
125 | vcs | General | Feature Request | Very Low | Blank screen evasion (mtn feature) | Deferred | |
1.14 |
Task Description
Great feature, implemented in mtn
http://moviethumbnail.sourceforge.net/
See also FS#126
|
|
172 | vcs | General | TO-DO | Very Low | Don't autoload './vcs.conf' | Assigned | |
1.14 |
Task Description
See FS#171
|
|
375 | vcs | General | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 |
Task Description
Should allow to disable it in both configuration and command-line.
|
|
220 | Network Type Indicator | | Feature Request | Very Low | Allow turning on/off network connection | Assigned | |
? |
Task Description
Submitted by Tom
Allow turning network connection on/off directly
|
|
277 | Network Type Indicator | | Feature Request | Very Low | Add a notification sound when the connection is lost | Researching | |
? |
Task Description
Feedback from Wai keun Chong
Wai keun Chong 21/10/2014 4:28
Good App
This is the app what i looking for and it would be great if could add
a notification sound when a network loss
|
|
223 | Network Type Indicator | | Feature Request | Very Low | Indicate roaming in status bar | Assigned | |
1.6 |
Task Description
Submitted by Tom
Display alarm or change color to indicate roaming
|
|
331 | Network Type Indicator | General | Feature Request | Very Low | Display provider name in notification | Assigned | |
1.6 |
Task Description
Submitted by Tom: FS#222 Display provider name in status bar
Not feasible in the actual status bar, but can be done in the notification.
|
|
334 | Network Type Indicator | Build System | TO-DO | Very Low | Use Gradle to define build-type-dependant fields | Assigned | |
1.6 |
Task Description
Gradle allows to define fields on the generated class BuildConfig . This should be enough to discard the current per-build-type classes.
Example: https://stackoverflow.com/questions/24518940/custom-fields-for-a-build-type-in-gradle
|
|
350 | Network Type Indicator | Internal | TO-DO | Very Low | Remove Devel.DEBUG | Assigned | |
1.6 |
Task Description
In the past BuildConfig.DEBUG wasn’t reliable (when combining Eclipse and ADT), but on Android Studio with Gradle it can be used safely and hence there’s no need to duplicate the functionality.
|
|
372 | Network Type Indicator | General | TO-DO | Very Low | Drop support for older versions of Android | Assigned | |
1.6 |
Task Description
As of 2019-07 usage below KitKat is anecdotal:
2.3.x: 0.04% 4.0.x: 0.07% 4.1: 0.86% 4.2: 1.35% 4.3: 0.82%
2.3 to 4.3: 3.14%
4.4: 6.28% 5.0: 4.33%
|
|
376 | relevation | General | TO-DO | Very Low | Add command-line argument to generate configuration | Assigned | |
1.4 |
Task Description
Should provide an easy way to generate a new configuration file based on the provided command-line arguments.
|
|
50 | vcs | General | Feature Request | Very Low | Allow setting text outlines | Deferred | |
|
Task Description
Originally requested by Dougn Redhammer
E.g. with ImageMagick’s -stroke and -strokewidth
|
|
104 | vcs | General | Feature Request | Very Low | Accept percentages in --from and --to | Deferred | |
|
Task Description
No need for description
|
|
315 | vcs | General | Feature Request | Low | Recurse directories, output to current dir | Assigned | |
? |
Task Description
Request by Chris Hills
http://outlyer.net/2014-05-18:vcs-1_13_2-released/comment-page-1/#comment-17238:
Thanks Toni. I was hoping I could simply run `$ vcs-1.13.2.bash -? **/*.mp4` to create contact sheets for all videos in all subfolders, but it sounds like I’ll have to use a wrapper script. Would you consider adding this in a future release for a donation?
My reply:
I guess you’re using zsh-ish globbing there.
That’s not something I use so I didn’t even think of the case where recursing could be so simple.
It was a bit of an overlook on my part not to have the option to output to the same directory as the video, probably because recursion always required a wrapper in my head.
|
|
377 | vcs | General | Feature Request | Low | Allow screenshotting half of the video (for side-by-sid... | Assigned | |
? |
Task Description
Asked by Bob on the blog
Would it be possible to somehow specify to only screenshot half of the video image (for 180 side-by-side VR videos)?
Or would this require new features to be added to the VCS?
|
|
56 | vcs | General | Feature Request | Low | Add transcode as possible capturer | Deferred | |
1.14 |
Task Description
Originally requested by Phil Grundig
See vcs:devel:transcode
|
|
151 | vcs | General | TO-DO | Low | Override-able variables cleanup: Removal of deprecated ... | Assigned | |
1.14 |
Task Description
Introduce new names in 1.12 ( FS#120 )
Remove old names in 1.13 or 1.14 (this)
|
|
227 | vcs | General | TO-DO | Low | Failed blank frame evasion should go back to original t... | Assigned | |
1.14 | |
|
249 | vcs | General | TO-DO | Low | Add libav as possible capturer | Assigned | |
1.14 | |
|
363 | vcs | General | Bug Report | Low | File names with '#' lead to errors when creating versio... | Assigned | |
1.14 | |
|
367 | vcs | General | Feature Request | Low | Add HDR support | Assigned | |
1.14 | |
|
329 | Network Type Indicator | General | TO-DO | Low | Release 1.6 | Assigned | |
Meta: Release Cycle | |
|
201 | Network Type Indicator | | Feature Request | Low | Support multi-SIM devices | Assigned | |
? | |
|
313 | Network Type Indicator | | Bug Report | Low | Incompatibility with Samsung Tab A (LTE version) | Unconfirmed | |
? | |
|
321 | Network Type Indicator | General | Feature Request | Low | Allow hiding icon when mobile data is tured off | Assigned | |
? | |
|
322 | Network Type Indicator | General | Feature Request | Low | Allow disabling icon unless roaming | Assigned | |
? | |
|
341 | Network Type Indicator | General | Bug Report | Low | Status bar icon disappears after a while on Huawei phon... | Requires testing | |
? | |
|
244 | Network Type Indicator | | TO-DO | Low | Allow disabling the display of connection status on ico... | Assigned | |
1.6 | |
|
245 | Network Type Indicator | | TO-DO | Low | Allow choosing between "offline" and "online" icons whe... | Assigned | |
1.6 | |
|
246 | Network Type Indicator | | TO-DO | Low | Add support for expanded notifications with extra infor... | Assigned | |
1.6 | |
|
335 | Network Type Indicator | General | Feature Request | Low | Add alternative icons | Assigned | |
1.6 | |
|
355 | Network Type Indicator | General | TO-DO | Low | Re-do problematic vectorial icons | Researching | |
1.6 | |
|
358 | Network Type Indicator | General | TO-DO | Low | Revamp notification | Assigned | |
1.6 | |
|
360 | Network Type Indicator | General | TO-DO | Low | Remove black icons | Assigned | |
1.6 | |
|
191 | mp3plot | Core/General | TO-DO | Low | Release 0.6.1 | New | |
Meta: Release Cycle | |
|
216 | Quick File Share | | TO-DO | Low | Release 1.0 | Assigned | |
Meta: Release Cycle | |
|
272 | Quick File Share | | TO-DO | Low | Release 0.15 | Assigned | |
Meta: Release Cycle | |
|
374 | relevation | General | TO-DO | Low | Release 1.4 | Assigned | |
Meta: Release Cycle | |
|
379 | relevation | General | TO-DO | Low | Switch default mode to AND | Assigned | |
1.4 | |
|
383 | relevation | General | Feature Request | Low | Add command-line argument to ignore configuration file | Assigned | |
1.4 | |
|
275 | Quick File Share | | TO-DO | Low | Update progress bar to support files of unknown size | Assigned | |
1.0 | |
|
269 | Quick File Share | | TO-DO | Low | Allow sharing multiple files | Requires testing | |
0.15 | |