|
350 | Network Type Indicator | Internal | TO-DO | Very Low | Remove Devel.DEBUG | Assigned | |
1.6 |
Task Description
In the past BuildConfig.DEBUG wasn’t reliable (when combining Eclipse and ADT), but on Android Studio with Gradle it can be used safely and hence there’s no need to duplicate the functionality.
|
|
153 | vcs | General | TO-DO | Very Low | Release 1.14 | Limbo | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 1.14
Previous: FS#152 FS#218 FS#224 FS#250 FS#366
|
|
200 | vcs | General | TO-DO | Very Low | Release 2.0 | Assigned | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 2.0 .
v2.0 will be a rewrite in Python.
Previous: FS#153
|
|
52 | vcs | General | Feature Request | Very Low | Allow review of screenshots before composing | Limbo | |
? |
Task Description
Originally requested by Daniel
|
|
163 | vcs | General | TO-DO | Very Low | Move rarely used features to plugins | Assigned | |
? |
Task Description
No need for description
|
|
164 | vcs | General | Bug Report | Very Low | Implement instrumentation | Assigned | |
? |
Task Description
No need for description
|
|
194 | vcs | General | Feature Request | Medium | Files incorrectly reporting "too short" length aren't d... | Researching | |
? |
Task Description
As reported by Dirk Reiners (paraphrased)
Files incorrectly reporting too short length (unlike too long), pass the safe_length_measure check ⇒ This prevents correcting length.
|
|
315 | vcs | General | Feature Request | Low | Recurse directories, output to current dir | Assigned | |
? |
Task Description
Request by Chris Hills
http://outlyer.net/2014-05-18:vcs-1_13_2-released/comment-page-1/#comment-17238:
Thanks Toni. I was hoping I could simply run `$ vcs-1.13.2.bash -? **/*.mp4` to create contact sheets for all videos in all subfolders, but it sounds like I’ll have to use a wrapper script. Would you consider adding this in a future release for a donation?
My reply:
I guess you’re using zsh-ish globbing there.
That’s not something I use so I didn’t even think of the case where recursing could be so simple.
It was a bit of an overlook on my part not to have the option to output to the same directory as the video, probably because recursion always required a wrapper in my head.
|
|
377 | vcs | General | Feature Request | Low | Allow screenshotting half of the video (for side-by-sid... | Assigned | |
? |
Task Description
Asked by Bob on the blog
Would it be possible to somehow specify to only screenshot half of the video image (for 180 side-by-side VR videos)?
Or would this require new features to be added to the VCS?
|
|
382 | vcs | General | Bug Report | Medium | Look into detecting or setting manually GNU getopt | Assigned | |
? |
Task Description
Reported by KW in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-51875
With the new script I'm getting issues the following error:
No compatible version of getopt in path, can't continue.
Enhanced getopt (i.e. GNU getopt) is required
Added by Darko in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-52719
The homebrew's version of vcs has this at line 186:
declare GETOPT=/opt/homebrew/opt/gnu-getopt/bin/getopt
While Toni's just uses whatever is on path:
declare GETOPT=getopt
… which on macOS is non-gnu version of getopt.
Added by X in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-53401
The issue is on line 186. Brew version has this:
declare GETOPT=/usr/local/opt/gnu-getopt/bin/getopt
The trunk version has:
declare GETOPT=getopt
When I backport the most important change you did in the trunk version ('`fx:image.mean` > `fx:mean` ') then indeed the error messages on '.mean*100 ' are gone.
|
|
92 | vcs | General | Feature Request | Very Low | Support OpenSolaris/SunOS | Limbo | |
2.0 |
Task Description
Being based on System V, it’s quite different to most other Unix-like OSes, might be a good target for x-platform enhancements
|
|
162 | vcs | General | TO-DO | Very Low | Implement plugins | Assigned | |
2.0 |
Task Description
No need for description
|
|
56 | vcs | General | Feature Request | Low | Add transcode as possible capturer | Deferred | |
1.14 |
Task Description
Originally requested by Phil Grundig
See vcs:devel:transcode
|
|
93 | vcs | General | Bug Report | Very Low | grep -o is not portable | Assigned | |
1.14 |
Task Description
-o is a GNU extension, supported in Linux and FreeBSD
Unsupported in SunOS, OpenBSD?
|
|
125 | vcs | General | Feature Request | Very Low | Blank screen evasion (mtn feature) | Deferred | |
1.14 |
Task Description
Great feature, implemented in mtn
http://moviethumbnail.sourceforge.net/
See also FS#126
|
|
147 | vcs | General | Feature Request | Medium | Configuration options revamp | Assigned | |
1.14 |
Task Description
The available configuration options need a serious review and renaming. Old names will be accepted with warnings for either two releases or six months.
Also, should provide a sample configuration file so that the syntax and options are clearer.
|
|
151 | vcs | General | TO-DO | Low | Override-able variables cleanup: Removal of deprecated ... | Assigned | |
1.14 |
Task Description
Introduce new names in 1.12 ( FS#120 )
Remove old names in 1.13 or 1.14 (this)
|
|
172 | vcs | General | TO-DO | Very Low | Don't autoload './vcs.conf' | Assigned | |
1.14 |
Task Description
See FS#171
|
|
196 | vcs | General | TO-DO | Medium | ffmpeg is deprecated | Assigned | |
1.14 |
Task Description
See http://libav.org/, Jan 27 2012. Also http://libav.org/index.html#fftools_rename for changes to the syntax.
Must change to avprobe /ffprobe and/or avconv .
|
|
197 | vcs | General | TO-DO | High | Move away from /dev/shm | Assigned | |
1.14 |
Task Description
/dev/shm isn’t really intended as an alternate temporary location, and VCS’ temporary files can easily grow too large for it too.
As a possible alternative offer a first-run choice of temp-dir (maybe suggesting /dev/shm ).
References: http://wiki.debian.org/ReleaseGoals/RunDirectory#Why_put_.2BAC8-dev.2BAC8-shm_and_.2BAC8-tmp_under_.2BAC8-run.3F http://stackoverflow.com/questions/9745281/tmp-vs-dev-shm-for-temp-file-storage-on-linux
|
|
227 | vcs | General | TO-DO | Low | Failed blank frame evasion should go back to original t... | Assigned | |
1.14 |
Task Description
When a frame evasion is tried and given up, the chosen timestamp should be the original instead of the last attempt
|
|
249 | vcs | General | TO-DO | Low | Add libav as possible capturer | Assigned | |
1.14 |
Task Description
No need for description
|
|
363 | vcs | General | Bug Report | Low | File names with '#' lead to errors when creating versio... | Assigned | |
1.14 |
Task Description
I.e. create file sample#.avi
Run vcs on sample#.avi -> sample#.avi.png is created. Run vcs again. sample#.avi-1.png should be created, but sed generates an error.
|
|
367 | vcs | General | Feature Request | Low | Add HDR support | Assigned | |
1.14 |
Task Description
HDR isn’t well supported as reported by remlap and ThaDr.
Their comments:
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-30901
Hi I am trying to thumbnail some HDR content is there anyway to insert ffmpeg filters in
-vf zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=mobius:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p
Thanks
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32413:
I’m also trying to do some HDR content and pass the -vf info to ffmpeg. I can’t get it to work even using a wrapper script.
It always comes up with awk errors, starting with “unterminated regexp”.
Is there any chance of updating vcs to support manual passing of those -vf arguments to ffmpeg?
HDR content is very common nowadays…
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32423
I’m using vcs 1.13.2 on ubuntu and ended up doing it by adding the line:
-vf ‘zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p’ \
at line 2203, in the ffmpeg_capture() function where it sets the ffmpeg command line options.
Couldn’t work out how to do it with a wrapper script.
|
|
375 | vcs | General | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 |
Task Description
Should allow to disable it in both configuration and command-line.
|
|
378 | vcs | General | Bug Report | Medium | Blank frame evasion produces error on latest ImageMagic... | Assigned | |
1.14 | |
|
329 | Network Type Indicator | General | TO-DO | Low | Release 1.6 | Assigned | |
Meta: Release Cycle | |
|
380 | Network Type Indicator | General | TO-DO | High | Re-stablish in Google Play | Assigned | |
Meta: Release Cycle | |
|
321 | Network Type Indicator | General | Feature Request | Low | Allow hiding icon when mobile data is tured off | Assigned | |
? | |
|
322 | Network Type Indicator | General | Feature Request | Low | Allow disabling icon unless roaming | Assigned | |
? | |
|
336 | Network Type Indicator | General | Bug Report | High | App doesn't load on boot (Huawei phones) | Researching | |
? | |
|
337 | Network Type Indicator | General | Bug Report | High | App doesn't load on boot | Researching | |
? | |
|
341 | Network Type Indicator | General | Bug Report | Low | Status bar icon disappears after a while on Huawei phon... | Requires testing | |
? | |
|
331 | Network Type Indicator | General | Feature Request | Very Low | Display provider name in notification | Assigned | |
1.6 | |
|
335 | Network Type Indicator | General | Feature Request | Low | Add alternative icons | Assigned | |
1.6 | |
|
355 | Network Type Indicator | General | TO-DO | Low | Re-do problematic vectorial icons | Researching | |
1.6 | |
|
356 | Network Type Indicator | General | TO-DO | Medium | Enhance RTL layout | Assigned | |
1.6 | |
|
358 | Network Type Indicator | General | TO-DO | Low | Revamp notification | Assigned | |
1.6 | |
|
359 | Network Type Indicator | General | TO-DO | Medium | Drop dark icons in Lollipop+ | Assigned | |
1.6 | |
|
360 | Network Type Indicator | General | TO-DO | Low | Remove black icons | Assigned | |
1.6 | |
|
369 | Network Type Indicator | General | Bug Report | Medium | Notification doesn't load on boot | Assigned | |
1.6 | |
|
370 | Network Type Indicator | General | Bug Report | Medium | App crashes on boot | Assigned | |
1.6 | |
|
372 | Network Type Indicator | General | TO-DO | Very Low | Drop support for older versions of Android | Assigned | |
1.6 | |
|
374 | relevation | General | TO-DO | Low | Release 1.4 | Assigned | |
Meta: Release Cycle | |
|
376 | relevation | General | TO-DO | Very Low | Add command-line argument to generate configuration | Assigned | |
1.4 | |
|
379 | relevation | General | TO-DO | Low | Switch default mode to AND | Assigned | |
1.4 | |
|
383 | relevation | General | Feature Request | Low | Add command-line argument to ignore configuration file | Assigned | |
1.4 | |
|
5 | vcs | General | Bug Report | Medium | Meta-information gets overlapped with small contact she... | Assigned | |
| |
|
32 | vcs | General | Bug Report | High | vcs gets stuck on first capture (or during probe) | Researching | |
| |
|
41 | vcs | General | Feature Request | Low | Adjust timestamps size to capture size | Requires testing | |
| |