|
169 | Bug Report | Low | --ffmpeg and --mplayer documented but ignored | Closed | |
1.12.3 |
Task Description
No need for description
|
|
154 | Bug Report | Low | --nonlatin doesn't use the automatically selected font | Closed | |
1.12 |
Task Description
-I does use it
|
|
35 | Bug Report | Low | -c gets ignored when not combined with -n | Closed | |
|
Task Description
Originally reported by Homer S
|
|
97 | Bug Report | Low | -t doesn't accept timestamp syntax | Closed | |
1.11 |
Task Description
No need for description
|
|
187 | Bug Report | Low | -U without argument fails | Closed | |
1.12.3 |
Task Description
Parsing of the “-U ” option (optional argument) is incorrect, it always receives an argument (empty if none provided) which must be shifted manually. Currently it’s only shifted if provided explicitly.
“–fullname ” is not affected since it doesn’t take any arguments.
|
|
104 | Feature Request | Very Low | Accept percentages in --from and --to | Deferred | |
|
Task Description
No need for description
|
|
103 | Feature Request | Low | Accept percentages in -H | Closed | |
1.11 |
Task Description
No need for description
|
|
159 | Feature Request | Low | Add alternative for font_filename | Closed | |
1.12.2 |
Task Description
font_filename is ignored in 1.12
An alternative in the form of (boolean) nonlatin_filenames or similar should be added.
|
|
179 | TO-DO | Very Low | Add codec identification for FRAPS captures | Closed | |
1.13 |
Task Description
mplayer: FPS1
i.e.:
ID_VIDEO_CODEC=fffraps
ID_VIDEO_FORMAT=FPS1
ffmpeg: fraps
i.e.:
Stream #0.0: Video: fraps, yuvj420p, 1680x1050, 30 fps, 30 tbr, 30 tbn, 30 tbc
|
|
247 | TO-DO | Low | Add codec identification for H.265/HEVC | Closed | |
1.13.3 |
Task Description
ffmpeg: hevc
i.e.:
Stream #0:0[0x12d]: Video: hevc (Main) (HEVC / 0×43564548), yuv420p(tv), 3840×2160, 150 tbr, 90k tbn, 90k tbc Stream #0:0: Video: hevc, yuv420p(tv), 3840×2160, 25 fps, 25 tbr, 1200k tbn, 25 tbc
Samples: http://www.elecard.com/en/download/videos.html
|
|
20 | Feature Request | Very Low | Add extra set of smaller captures | Closed | |
|
Task Description
See http://p.outlyer.net/dox/vcs:extended_mode
|
|
107 | Feature Request | Low | Add ffmpeg as video identifier | Closed | |
1.11 |
Task Description
No need for description
|
|
156 | Feature Request | Low | Add font_all, bg_all and fg_all | Closed | |
1.12.2 |
Task Description
Configuration options that will trigger a change of all fonts, background and foreground settings respectively
|
|
367 | Feature Request | Low | Add HDR support | Assigned | |
1.14 |
Task Description
HDR isn’t well supported as reported by remlap and ThaDr.
Their comments:
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-30901
Hi I am trying to thumbnail some HDR content is there anyway to insert ffmpeg filters in
-vf zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=mobius:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p
Thanks
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32413:
I’m also trying to do some HDR content and pass the -vf info to ffmpeg. I can’t get it to work even using a wrapper script.
It always comes up with awk errors, starting with “unterminated regexp”.
Is there any chance of updating vcs to support manual passing of those -vf arguments to ffmpeg?
HDR content is very common nowadays…
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32423
I’m using vcs 1.13.2 on ubuntu and ended up doing it by adding the line:
-vf ‘zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p’ \
at line 2203, in the ffmpeg_capture() function where it sets the ffmpeg command line options.
Couldn’t work out how to do it with a wrapper script.
|
|
70 | Feature Request | Very Low | Add JPEG2000 output | Closed | |
|
Task Description
No need for description
|
|
249 | TO-DO | Low | Add libav as possible capturer | Assigned | |
1.14 |
Task Description
No need for description
|
|
143 | TO-DO | Low | Add new configuration locations | Closed | |
1.12 |
Task Description
With the introduction of profiles vcs will need directories to place them.
Using vcs-nix might be safer since vcs is too short and too meaningful (Version Control System) to hijack it safely.
Candidates:
|
|
81 | Feature Request | Very Low | Add profiles support | Closed | |
1.12 |
Task Description
Implementation notes:
Reserved namespace: :<WHATEVER>
Built-in profiles won’t use reserved names
System profiles will always take precedence over built-in profiles
~ profiles take precedence over site (/usr and /usr/local ) profiles
/usr/local takes precedence over /usr . Both are searched
No such thing as a default profile (this would be redundant to configuration files)
Profiles can’t depend/include/load other profiles
Profile names are reflected in file names
Specific files will be loadable with --config
Markup
|
|
56 | Feature Request | Low | Add transcode as possible capturer | Deferred | |
1.14 |
Task Description
Originally requested by Phil Grundig
See vcs:devel:transcode
|
|
41 | Feature Request | Low | Adjust timestamps size to capture size | Requires testing | |
|
Task Description
Originally suggested by Dogn Redhammer
|
|
144 | Bug Report | Low | Allow configuration in dotdir | Closed | |
1.12 |
Task Description
With the introduction of ~/.vcs/ (or ~/.vcs-nix/ ) it makes sense moving local configurations there. The older ~/.vcs.conf will still be accepted.
Load order:
/etc/vcs.conf
~/.vcs.conf
~/.vcs/vcs.conf
./vcs.conf
|
|
21 | Feature Request | Low | Allow configuration overrides from the command-line | Closed | |
|
Task Description
Allow command-line overrides (changing internal variables from the command-line).
|
|
30 | Feature Request | Very Low | Allow disabling "created by..." line | Closed | |
|
Task Description
.
|
|
375 | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 |
Task Description
Should allow to disable it in both configuration and command-line.
|
|
311 | Bug Report | Medium | Allow disabling coloured output altogether | Closed | |
1.13.3 |
Task Description
Reported by DanC
https://outlyer.net/2014-05-18:vcs-1_13_2-released/comment-page-1/#comment-20390:
A great utilty... I’ve been using this for a couple of years now (it runs every night as a cron job).
I’ve been looking at cleaning up the output that cron captures from each of its commands and stores as a system email.
I’ve enabled the -Wc option to prevent coloured output. Mostly this works except near the start of the script when it says:
Settings from /home/danc/.vcs/vcs.conf:
bg_heading
This is still shown in green. Bug?
Currently the colour only stops after the option is found.
|
|
47 | Feature Request | Very Low | Allow disabling milliseconds in timestamps | Closed | |
| |
|
19 | Feature Request | Very Low | Allow highlighting individual captures | Closed | |
| |
|
51 | Feature Request | Very Low | Allow manually setting padding | Closed | |
1.11 | |
|
4 | Feature Request | Low | Allow more complex, human readable timestamps | Closed | |
| |
|
6 | Feature Request | Low | Allow overriding default command-line | Closed | |
| |
|
105 | Feature Request | Very Low | Allow overriding default height | Closed | |
1.11 | |
|
128 | TO-DO | Low | Allow overriding default interval | Closed | |
1.11 | |
|
127 | TO-DO | Low | Allow overriding default number of captures | Closed | |
1.11 | |
|
108 | Feature Request | Low | Allow overriding DISABLE_SHADOWS and DISABLE_TIMESTAMPS | Closed | |
| |
|
17 | Feature Request | Low | Allow quiet operation | Closed | |
| |
|
52 | Feature Request | Very Low | Allow review of screenshots before composing | Limbo | |
? | |
|
377 | Feature Request | Low | Allow screenshotting half of the video (for side-by-sid... | Assigned | |
? | |
|
3 | Feature Request | Medium | Allow setting output filename | Closed | |
1.11 | |
|
50 | Feature Request | Very Low | Allow setting text outlines | Deferred | |
| |
|
219 | Submitted Patch | Medium | Arch PKGBUILD outdated | Closed | |
1.13.1 | |
|
37 | Bug Report | Low | Aspect ratio guessing fails if height is non-standard | Closed | |
| |
|
122 | TO-DO | Low | Avoid recapturing | Closed | |
1.12.3 | |
|
123 | Feature Request | Low | Avoid repeating captures in different sets | Closed | |
1.13 | |
|
160 | Bug Report | Critical | AWK getting comma-separated decimals | Closed | |
1.12.1 | |
|
88 | Bug Report | Low | bash might not be in /bin | Closed | |
| |
|
124 | Feature Request | Low | Better looking timestamps | Assigned | |
| |
|
188 | TO-DO | Low | Blank frame evasion | Closed | |
1.13 | |
|
378 | Bug Report | Medium | Blank frame evasion produces error on latest ImageMagic... | Assigned | |
1.14 | |
|
125 | Feature Request | Very Low | Blank screen evasion (mtn feature) | Deferred | |
1.14 | |
|
7 | Bug Report | Low | Broken program signature | Closed | |
| |