|
382 | Bug Report | Medium | Look into detecting or setting manually GNU getopt | Assigned | |
? |
Task Description
Reported by KW in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-51875
With the new script I'm getting issues the following error:
No compatible version of getopt in path, can't continue.
Enhanced getopt (i.e. GNU getopt) is required
Added by Darko in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-52719
The homebrew's version of vcs has this at line 186:
declare GETOPT=/opt/homebrew/opt/gnu-getopt/bin/getopt
While Toni's just uses whatever is on path:
declare GETOPT=getopt
… which on macOS is non-gnu version of getopt.
Added by X in comments: https://outlyer.net/2019-11-26:vcs-1-13-4-released/#comment-53401
The issue is on line 186. Brew version has this:
declare GETOPT=/usr/local/opt/gnu-getopt/bin/getopt
The trunk version has:
declare GETOPT=getopt
When I backport the most important change you did in the trunk version ('`fx:image.mean` > `fx:mean` ') then indeed the error messages on '.mean*100 ' are gone.
|
|
378 | Bug Report | Medium | Blank frame evasion produces error on latest ImageMagic... | Assigned | |
1.14 |
Task Description
Reported by Paul:
Hey, I'm using VCS via Homebrew Install ( https://formulae.brew.sh/formula/vcs#default) and since the last update of imagemagick (?) I get dozens of error messages:
convert: Expected operator at '.mean*100' @ error/fx.c/GetOperator/2408
Confirmed to happen on ImageMagick 7.1 on Linux, the contact sheet is generated but blank frame evasion is skipped
|
|
377 | Feature Request | Low | Allow screenshotting half of the video (for side-by-sid... | Assigned | |
? |
Task Description
Asked by Bob on the blog
Would it be possible to somehow specify to only screenshot half of the video image (for 180 side-by-side VR videos)?
Or would this require new features to be added to the VCS?
|
|
375 | TO-DO | Very Low | Allow disabling blank frame evasion | Assigned | |
1.14 |
Task Description
Should allow to disable it in both configuration and command-line.
|
|
373 | Bug Report | Critical | Number of columns is ignored | Closed | |
|
Task Description
First reported on BSD and Debian 10 (reproducible), apparently tied to some updated tool
|
|
367 | Feature Request | Low | Add HDR support | Assigned | |
1.14 |
Task Description
HDR isn’t well supported as reported by remlap and ThaDr.
Their comments:
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-30901
Hi I am trying to thumbnail some HDR content is there anyway to insert ffmpeg filters in
-vf zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=mobius:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p
Thanks
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32413:
I’m also trying to do some HDR content and pass the -vf info to ffmpeg. I can’t get it to work even using a wrapper script.
It always comes up with awk errors, starting with “unterminated regexp”.
Is there any chance of updating vcs to support manual passing of those -vf arguments to ffmpeg?
HDR content is very common nowadays…
https://outlyer.net/2017-05-26:vcs-1-13-3-released/#comment-32423
I’m using vcs 1.13.2 on ubuntu and ended up doing it by adding the line:
-vf ‘zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p’ \
at line 2203, in the ffmpeg_capture() function where it sets the ffmpeg command line options.
Couldn’t work out how to do it with a wrapper script.
|
|
366 | TO-DO | Low | Release 1.13.4 | Closed | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs to be fixed in the 1.13.4 release.
1.13.4 is a minor bugfix release for bugs found while development for 1.14 and 2.0 is stalled.
Previous: FS#152 FS#218 FS#224 FS#250
Next: FS#153
|
|
365 | Bug Report | Low | File sizes are rounded | Closed | |
1.13.4 |
Task Description
Reported by remlap
File sizes are displayed as 3.00GiB instead of 3.54GiB
|
|
364 | Bug Report | Low | Evasion offsets aren't walked over in array | Closed | |
1.13.4 |
Task Description
Submitted by Davide Cavestro
The array EVASION_ALTERNATIVES isn’t looped over correctly. Correction:
- for delta in $EVASION_ALTERNATIVES ; do
+ for delta in ${EVASION_ALTERNATIVES[*]} ; do
|
|
363 | Bug Report | Low | File names with '#' lead to errors when creating versio... | Assigned | |
1.14 |
Task Description
I.e. create file sample#.avi
Run vcs on sample#.avi -> sample#.avi.png is created. Run vcs again. sample#.avi-1.png should be created, but sed generates an error.
|
|
323 | Bug Report | Critical | Codec information is misaligned/cropped | Closed | |
1.13.3 |
Task Description
Originally reported by Markus and Wade
The codec information box gets cropped with current versions of ImageMagick.
|
|
315 | Feature Request | Low | Recurse directories, output to current dir | Assigned | |
? |
Task Description
Request by Chris Hills
http://outlyer.net/2014-05-18:vcs-1_13_2-released/comment-page-1/#comment-17238:
Thanks Toni. I was hoping I could simply run `$ vcs-1.13.2.bash -? **/*.mp4` to create contact sheets for all videos in all subfolders, but it sounds like I’ll have to use a wrapper script. Would you consider adding this in a future release for a donation?
My reply:
I guess you’re using zsh-ish globbing there.
That’s not something I use so I didn’t even think of the case where recursing could be so simple.
It was a bit of an overlook on my part not to have the option to output to the same directory as the video, probably because recursion always required a wrapper in my head.
|
|
314 | Submitted Patch | Medium | Patch for approximate size calculation | Closed | |
1.13.3 |
Task Description
Submitted by someone desiring no credit.
Here’s a patch against 1.13.2 for mistaken approximate size calculation.
Self-notes about the patch:
More accurate rounding → Discarded. I went for rounding by excess
Leading 0 in fractionary units was not present in the original → BUG
Sample: Samsung HD sample, 1080pto720p version
|
|
311 | Bug Report | Medium | Allow disabling coloured output altogether | Closed | |
1.13.3 |
Task Description
Reported by DanC
https://outlyer.net/2014-05-18:vcs-1_13_2-released/comment-page-1/#comment-20390:
A great utilty... I’ve been using this for a couple of years now (it runs every night as a cron job).
I’ve been looking at cleaning up the output that cron captures from each of its commands and stores as a system email.
I’ve enabled the -Wc option to prevent coloured output. Mostly this works except near the start of the script when it says:
Settings from /home/danc/.vcs/vcs.conf:
bg_heading
This is still shown in green. Bug?
Currently the colour only stops after the option is found.
|
|
250 | TO-DO | Low | Release 1.13.3 | Closed | |
Meta: Release Cycle |
Task Description
No need for description
|
|
249 | TO-DO | Low | Add libav as possible capturer | Assigned | |
1.14 |
Task Description
No need for description
|
|
248 | Bug Report | High | Unsupported format gives errors | Closed | |
1.13.3 |
Task Description
Seen in HEVC contained in MPEG-TS
|
|
247 | TO-DO | Low | Add codec identification for H.265/HEVC | Closed | |
1.13.3 |
Task Description
ffmpeg: hevc
i.e.:
Stream #0:0[0x12d]: Video: hevc (Main) (HEVC / 0×43564548), yuv420p(tv), 3840×2160, 150 tbr, 90k tbn, 90k tbc Stream #0:0: Video: hevc, yuv420p(tv), 3840×2160, 25 fps, 25 tbr, 1200k tbn, 25 tbc
Samples: http://www.elecard.com/en/download/videos.html
|
|
227 | TO-DO | Low | Failed blank frame evasion should go back to original t... | Assigned | |
1.14 |
Task Description
When a frame evasion is tried and given up, the chosen timestamp should be the original instead of the last attempt
|
|
226 | Bug Report | Very Low | Pre-releases error on files with single quotes in their ... | Closed | |
1.13.2 |
Task Description
Pointed out by Miya
eval: line 1874: syntax error in conditional expression
eval: line 1874: syntax error near `got'
eval: line 1874: `[[ -n 'File's got problems.mp4.png' ]]'
Internal error at safe_rename():1510: [[ -n 'File's got problems.mp4.png' ]]
|
|
225 | Bug Report | Medium | Number of captures exceeded by one with mplayer | Closed | |
1.13.2 |
Task Description
Reported by Miya
When using mplayer as capturer and defining a number of captures, the produced number exceeds it by one (i.e. 21 instead of 20).
|
|
224 | TO-DO | Low | Release 1.13.2 | Closed | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 1.13.2
Previous: FS#152 FS#218
Next: FS#250
|
|
219 | Submitted Patch | Medium | Arch PKGBUILD outdated | Closed | |
1.13.1 |
Task Description
Submitted by Eris Belew
Guidelines for the PKGBUILD script have changed.
Submitted updated PKGBUILD .
|
|
218 | TO-DO | Low | Release 1.13.1 | Closed | |
Meta: Release Cycle |
Task Description
This is a meta-item depending on bugs/features required to complete before releasing vcs 1.14 .
Previous: FS#152
Next: FS#224
|
|
217 | Bug Report | Medium | Unquoted grep pattern gives problems | Closed | |
1.13.1 |
Task Description
Submitted by Eris Belew
Unquotted grep pattern ^ID is problematic.
Patch submitted.
|
|
200 | TO-DO | Very Low | Release 2.0 | Assigned | |
Meta: Release Cycle | |
|
199 | Bug Report | Low | Cached captures are filtered more than once | Closed | |
1.13 | |
|
198 | Bug Report | Low | Console isn't always correctly restored | Closed | |
1.13 | |
|
197 | TO-DO | High | Move away from /dev/shm | Assigned | |
1.14 | |
|
196 | TO-DO | Medium | ffmpeg is deprecated | Assigned | |
1.14 | |
|
195 | Bug Report | High | Too short files might lead to infinte loop | Closed | |
1.13 | |
|
194 | Feature Request | Medium | Files incorrectly reporting "too short" length aren't d... | Researching | |
? | |
|
189 | Bug Report | High | VCS is broken on FreeBSD (and Mac OS X) since 1.12.3 | Closed | |
1.13 | |
|
188 | TO-DO | Low | Blank frame evasion | Closed | |
1.13 | |
|
187 | Bug Report | Low | -U without argument fails | Closed | |
1.12.3 | |
|
179 | TO-DO | Very Low | Add codec identification for FRAPS captures | Closed | |
1.13 | |
|
178 | Submitted Patch | Low | ffmpeg + piped mplayer dump can be used to identify | Requires testing | |
1.14 | |
|
177 | TO-DO | Low | Safe length feedback should print nicer timestamps | Closed | |
1.13 | |
|
176 | TO-DO | Very Low | Filmstrip not realistic | Closed | |
1.13 | |
|
175 | Bug Report | Medium | Failure after a certain number of uses | Closed | |
| |
|
174 | Bug Report | Medium | Video length is checked against mplayer's identificatio ... | Closed | |
1.12.3 | |
|
173 | TO-DO | Low | Switch to Bash 3 | Closed | |
1.12.3 | |
|
172 | TO-DO | Very Low | Don't autoload './vcs.conf' | Assigned | |
1.14 | |
|
171 | TO-DO | Very Low | Deprecate './vcs.conf' in favour of profiles | Closed | |
1.13 | |
|
170 | TO-DO | Very Low | Release 1.12.3 | Closed | |
Meta: Release Cycle | |
|
169 | Bug Report | Low | --ffmpeg and --mplayer documented but ignored | Closed | |
1.12.3 | |
|
168 | TO-DO | Low | Create basic manpage | Closed | |
1.12.2 | |
|
167 | Submitted Patch | Medium | Improper cleanup of tempdir | Closed | |
1.12.2 | |
|
166 | TO-DO | Very Low | Support WebM | Closed | |
1.12.2 | |
|
165 | TO-DO | Low | Release 1.12.2 | Closed | |
Meta: Release Cycle | |